Planetary imaging · Step 5 of 7
Capturing, setting by setting
In a sentence: Exposures in milliseconds, high gain, histogram at 60–70%, a region of interest and SER video.
The settings in SharpCap or FireCapture
Center the planet, focus as well as you can (a Bahtinov mask on a bright star helps) and set:
- Region of interest (ROI): a crop of about 640×480 pixels around the planet. More frames per second and less disk space.
- Exposure: as short as possible, 3 to 15 ms on Jupiter (a bit more on Saturn). If it drops below 100 frames per second, shorten it.
- Gain: high, until the histogram reaches 60–70%. More noise per frame, but it washes out when you stack thousands.
- Format: SER (or uncompressed AVI). Never MP4: the compression destroys the fine detail.
- Length: whatever the planet’s rotation allows (that’s step 6).
TipRecord several videos one after another instead of one very long one: if a gust of wind ruins one, the rest survive. And note the time: you’ll need it when you process.
Heads-upThis is where the mount shows, as Pau Montplet reminded us: with such a small crop and such a long focal length, the planet drifts off the screen in no time, and any vibration is multiplied. To start, any tracking mount will do, because the stacking realigns every frame; but once you’re chaining videos for half an hour to derotate them afterward, what you need isn’t guiding: it’s a mount that’s solid and tracks smoothly.