Planetary imaging: contents
Guide · 7 steps
Planetary imaging
Jupiter, Saturn and Mars in detail: the gear and the capture technique.
Imaging planets is almost the opposite of deep sky. A nebula is huge and faint: it asks for hours of light. A planet is tiny and very bright: the problem isn’t light, it’s size and the turbulence of the air, which distorts it dozens of times a second.
The good news: you can do it from the city, under a full Moon and without guiding. With the “lucky imaging” technique, a modest telescope pulls out Jupiter’s belts, the Cassini division in Saturn’s rings or Mars’s polar caps. Here you’ll see what focal length you need, which camera, and how to capture.
Move the focal length and watch Jupiter grow: from a dot with a telephoto to a disk with belts with a Schmidt-Cassegrain.
- Image scale
- Size on the sensor
- Each video, at most
Photos: Jupiter, Raúl Hussein · Saturn and Mars, NASA, ESA, STScI, A. Simon, M. Wong and J. Bell (Hubble), CC BY 4.0 · the Moon, Fran López. Jupiter’s moons are drawn.
What you need
- A telescope with enough aperture and a long focal length: a Schmidt-Cassegrain, a Maksutov or a Newtonian of 150 mm or more. (Aperture sets the detail; step 2 shows why, and what happens with less focal length.)
- A 2× or 3× Barlow lens, to stretch the focal length.
- A small, fast planetary camera (or, to try it out, your DSLR in video mode).
- A mount with tracking. To start you need neither guiding nor a high-end mount; as you push the magnification, what starts to matter is that it’s rigid and tracks smoothly, even unguided.
- A laptop with SharpCap or FireCapture (both free).
- A night with calm air: the kind where the stars barely twinkle.
The 7 steps
- Step 1 Lucky imaging You record a video of thousands of very short frames and keep only the few where the air happened to be still.
- Step 2 Aperture and focal length: which one sets the detail and which the size Diameter decides how much detail is there; focal length and pixel size, how many pixels you see it in. Both, and in that order.
- Step 3 The planetary camera (and your DSLR to start) Small and fast, with small pixels: it records hundreds of frames per second from a crop of the sensor.
- Step 4 The night rules: seeing, altitude and the ADC It works when the stars barely twinkle, the planet is high, and the telescope is cooled down and collimated.
- Step 5 Capturing, setting by setting Exposures in milliseconds, high gain, histogram at 60–70%, a region of interest and SER video.
- Step 6 The rotation limit Jupiter turns once in under 10 hours: a video that runs too long smears its detail. One to two minutes, at most.
- Step 7 When and what to shoot Every planet has its season, around its opposition: that’s when it’s closest, biggest and up all night.
What about the Moon? The same video-and-stack technique works for it. Developing the videos is a guide of its own, which is in Spanish for now.