Skip to content
ES App (ES) ↗
Your first telescope: contents

Guide · 7 steps

Your first telescope

Your first astrophotography setup, piece by piece: what to buy, where not to skimp, and what it costs.

A smart telescope does everything for you. Your own setup asks you to think a little more, but it gives you far more back: more field or more detail, whichever camera you want, and the option of improving it piece by piece. You supply the intelligence, and this guide helps you supply it.

The eternal question on the forums is “which telescope should I buy?” The answer hardly anyone gives at first: the first thing isn’t the telescope, it’s the mount. Here you’ll see why, which tube makes sense to start with, and how to split the budget without throwing money away.

Prices here are in US dollars and they’re ballpark figures for 2026. They come from our own Spanish figures: those include 21% VAT, US prices are quoted before sales tax, and at today’s exchange rate the two roughly cancel out, so the same numbers work. Take them as an order of magnitude, not as a quote.

Your budget 45% Mount 25% Tube and flattener 15% Camera 7% Guiding 8% Extras
A rough split: almost half of it for the mount. If you’re using your own DSLR, the camera’s share goes to the mount or to guiding.

What you need

  • An idea of what you feel like photographing: nebulae and galaxies, planets, or both.
  • A rough budget (the configurator at the end helps you split it).
  • If you already have a DSLR or mirrorless camera, count it in: it’s enough to start.
  • Patience to buy in stages: a good setup gets completed over time.

The 7 steps

  1. Step 1 Before you buy: what you want to photograph Nebulae and galaxies want short focal length and a precise mount; planets want a lot of focal length and a fast camera. Choose first.
  2. Step 2 The mount: don’t skimp here An equatorial mount with GoTo, loaded to between 50 and 70% of what the manufacturer claims.
  3. Step 3 The tube: short refractor, small Newtonian or Maksutov To start, a 60–80 mm refractor at 300–500 mm of focal length; later, a 150/750 Newtonian or, for planets, a 127 mm Maksutov.
  4. Step 4 The camera: start with what you have Your DSLR is enough to start; after that, a dedicated color camera, uncooled or cooled, depending on the budget.
  5. Step 5 What lets you go to bed: guiding and a focuser A guide scope with its camera gives you exposures of several minutes; a motorized focuser makes the last one as good as the first.
  6. Step 6 Control, power and the small essentials Something to run the camera and the mount (a laptop, a mini PC or an ASIAIR), power for the whole night, and heaters against dew.
  7. Step 7 Three example setups, with their budgets One to start with the bare minimum, the balanced one that lasts years, and one for planetary. In practice, adjust it to your own case.
And at the end, the configurator: build your first setupTell us what you want to photograph, how much you want to spend and whether you already have a DSLR: we’ll propose the setup piece by piece.

Would you rather the telescope did everything for you? Then look at the smart telescopes: what each one does, side by side.