Skip to content
ES App (ES) ↗
Backfocus, demystified: contents

Guide · 5 steps

Backfocus, demystified

Whether it even applies to you, how many millimeters your reducer asks for, how to get there and how to know you’ve nailed it.

Backfocus gave me a hard time. Odd stars in the corners, spacers coming and going, and always the same number in the forums: “55 mm”. Until I realized that my reducer didn’t ask for 55 mm but for 58, and that the same reducer asks for a different number depending on the scope you put it on.

My case isn’t everybody’s: some reducers are made for one specific scope, some generic ones give a single number, and others, like mine, come with a table. So the first thing to do is read up on your reducer and on your scope.

This guide isn’t about diagrams of stars with little lines pointing in or out. It’s about what you actually need: knowing whether it applies to you, finding your number, adding up what each part contributes, measuring it with calipers and checking with a photo that you’ve nailed it.

No reducer, flattener or corrector? Then it doesn’t apply to you: find the focus point and you’re done. Step 1: does it apply to you?

Download it as a PDF To print and take to the field: the 5 steps, with boxes to check and a sheet to write your backfocus down.

What you need

  • Your reducer, flattener or corrector, and the manufacturer’s spec sheet or manual.
  • Your telescope’s focal length, in millimeters.
  • Your camera’s spec sheet (or its T-ring, if it’s a DSLR or mirrorless camera).
  • Calipers: a cheap digital pair will do.
  • Spacers in several sizes, ideally including a thin one (0.5 or 1 mm).
  • One clear night for the test shot.

The 5 steps

  1. Step 1 Does backfocus apply to you? Only if you have a reducer, a field flattener or a corrector. Without one, there’s no distance to hit: you just find focus and you’re done.
  2. Step 2 Your reducer’s number (and why it isn’t always 55) Read up on your reducer and your scope: the manufacturer’s own reducer gives a fixed number; a generic one gives a starting point or a table by focal length.
  3. Step 3 What each part adds The camera already uses up part of it; the filter wheel, the off-axis guider and the spacers make up the rest. And the filter, if you have one, raises the number you have to hit.
  4. Step 4 Measure it with calipers What’s printed on the rings isn’t always what you’ve got: with everything assembled and tightened, measure, add the camera and compare.
  5. Step 5 Check it with a photo One test frame and a program that measures the stars in each corner will tell you whether it’s backfocus, tilt or focus.
And then, the practice: calculate your spacersYour reducer, the scope’s focal length, your camera and whatever sits in between: it tells you how many millimeters you’re missing and which spacers to use.