What isn’t in the box · Step 4 of 5
How much battery you actually need
In a sentence: Add up what each thing draws, multiply by the hours and compare it with what your battery really holds. There’s almost always a shortfall.
What each thing draws
Almost all astrophotography gear runs on 12 volts. These are the figures the manufacturers give and the measurements users publish, so you can do the math with numbers instead of feelings:
| What | Normally | At worst |
|---|---|---|
| Equatorial mount (EQ6-R class) | 0.4 to 1 A | 1.4 to 2.1 A slewing |
| Cooled camera (ASI2600 class) | 1 to 2 A | 3 A with cooling flat out |
| Controller (ASIAIR or mini PC) | 0.5 to 1 A | 2 A for a mini PC |
| Tube strap (90 mm), regulated | 0.25 to 0.4 A | 0.8 A flat out |
| Guide scope or finder strap | 0.1 A | 0.3 A |
| Motorized focuser | almost nothing | 0.5 A while moving |
All at 12 V, except the mount figures, which come from users at 13.8 V and vary a lot with load and cabling; the camera’s come from ZWO’s specifications (12 V, 3 A maximum). The straps are at 50% on the controller, as the dew guide recommends. Measure your own with an inline power meter if you want the exact number.
The math, with a normal setup
A deep-sky setup with a mount, a cooled camera, a controller and two straps draws, on average, around 3.5 amps. At 12 volts that’s about 42 watts.
An eight-hour night: 42 × 8 = 336 watt-hours. In amp-hours at 12 V, about 28 Ah.
And now the part that surprises people: don’t buy exactly that. Batteries don’t empty all the way (a lead-acid one shouldn’t go below 50%), cold takes capacity away, and the mount’s peaks ask for amps all at once. With double what you worked out you’ll be comfortable: in this example, 650 or 700 Wh, or a lithium battery of 50 to 60 Ah. If it’s lead-acid, more still, because you only get half of it.
TipIn winter the camera barely has to cool, because it’s already cold, but the night runs twelve hours instead of six, the battery gives less in the cold and the straps work harder. Do the math with your hours, not with eight.
The mAh trap
This is the one that has someone buy a “20,000 mAh” battery and run out of power two hours in. Those mAh are not at 12 volts: phone power banks are rated at 3.7 V, which is their cells’ voltage.
A 20,000 mAh battery at 3.7 V is 74 watt-hours. If your gear asks for 42 watts, that’s under two hours on paper, and more like an hour and a half once you count the losses of the converter stepping 3.7 up to 12 V.
So to compare, always use watt-hours (Wh). It’s the only number that doesn’t mislead: Wh = Ah × volts. If a manufacturer gives you only mAh and doesn’t say at what voltage, be suspicious.
Heads-upAnd look at the output voltage, not just the capacity. The EQ6-R accepts 11 to 16 V, but plenty of users report it gets temperamental below 12, and a lead-acid battery drops below that when it’s half done. Check too whether your power station’s 12 V car (cigarette-lighter) socket is regulated: some aren’t.
What to buy, in practice
- A power station with a 12 V output (the camping kind): the most convenient, with several outputs, a display showing the watts and an AC outlet as well. For the setup in the example, 700 Wh and up.
- A 12 V lithium battery (LiFePO4, 50 to 60 Ah for that same setup): cheaper per watt-hour and longer-lived. It takes cold well in use, though it shouldn’t be charged below freezing. You’ll need a splitter for the outputs.
- A lead-acid or car battery: the cheapest to get into, but heavy, you only use half of it, and it ages fast if you run it down hard.
- With a DSLR and a star tracker the math is different: two charged camera batteries and a small power bank for your phone will see the night out.
- And wall power, if you can: from home or anywhere with an outlet, a 12 V 10 A supply covers the example setup and never runs out. Keep the battery for the field.