The gear
Color or mono camera, and cooling
In a sentence: A color camera takes the photo in one go; a mono camera needs one filter per color, but it’s more sensitive and pulls out more detail.
The essentials
In a color sensor, each pixel only sees red, green or blue (the Bayer matrix), so with an Hα filter only a quarter of the pixels are working. A mono camera uses all of them with every filter (L, R, G, B, Hα, OIII, SII), but it asks for more nights and a filter wheel. Cooling keeps the sensor cold and at a fixed temperature: less noise, and darks you can reuse.
Color: everything in one frame
A color camera carries a matrix of filters (Bayer): of every four pixels, two see green, one red and one blue. Every frame already has color. It’s simpler, but with an Hα filter only the red pixels are working, a quarter of the sensor.
Mono: more sensitive, more work
Every pixel gets the light of each filter. For a color photo you need several runs (LRGB, or Hα, OIII and SII) and a filter wheel, or patience. In exchange, in narrowband it pulls in considerably more signal in the same time, and more resolution.