Backfocus, demystified · Step 4 of 5
Measure it with calipers
In a sentence: What’s printed on the rings isn’t always what you’ve got: with everything assembled and tightened, measure, add the camera and compare.
Why measure
The math in the previous step is the theory. In practice, a part from another brand, an adapter that doesn’t thread on all the way or a ring that isn’t properly tightened will change the real distance. A pair of calipers that costs a few dollars tells you in a minute.
How to measure it
- Assemble the whole train, from the reducer to the camera, with every thread properly tightened. Exactly as you’ll use it at night.
- Rest one jaw of the calipers on the face of the reducer thread the manufacturer measures from, and the other on the front face of the camera, where its backfocus starts.
- Add the camera’s backfocus (17.5 mm on a cooled ZWO, measured from the front of its 11 mm adapter; 6.5 mm if you measure to the camera body itself) to whatever the calipers read.
- Compare with your reducer’s number. If you’re short or long, add or remove spacers and measure again.
- Measure at two or three points around the train. If you get different readings, something is loose or crooked: fix it before going on.
TipOnce you’ve got it, mark the position of each part with a paint pen or a sticker. That way you can take it apart and put it back together without measuring again.