Skip to content
ES App (ES) ↗
Step 1 of 5: Does it apply?

Backfocus, demystified · Step 1 of 5

Does backfocus apply to you?

In a sentence: Only if you have a reducer, a field flattener or a corrector. Without one, there’s no distance to hit: you just find focus and you’re done.

No reducer, no backfocus

If you put the camera straight into the telescope’s focuser, with nothing in between correcting the light, there is no distance to hit. You move the focuser until the stars are points, and that’s it. Right now my 600 mm scope is set up that way, with no reducer, and backfocus simply doesn’t exist.

What can still happen is that the stars in the corners don’t come out perfect: that’s the field curvature of the scope itself, and moving the camera won’t fix it. That’s exactly what flatteners are for.

What creates the problem

Backfocus shows up when you add a part that corrects the light and is designed for the sensor to sit at one specific distance from it:

  • A reducer: it shortens the focal length (0.79x turns 600 mm into 474) and flattens the field.
  • A field flattener: it doesn’t change the focal length, it only flattens the field.
  • A coma corrector, on Newtonians: it makes the stars at the edge round again.
  • A scope with the flattener built in: many small refractors made for astrophotography (the Petzval designs) have nothing added, but the manufacturer still gives you a distance. If your scope has one, it applies to you.

Heads-upWithout a reducer something else can happen: the camera can’t reach focus because the focuser runs out of travel. That’s fixed with an extension tube, and there’s nothing to measure to the millimeter.