Skip to content
ES App (ES) ↗
Step 2 of 7: Before you start

Polar alignment · Step 2 of 7

Before you start: tripod, level and latitude

In a sentence: A solid tripod with one leg to the north, the mount leveled, and the latitude scale set to yours: that way you start close.

The two bolts you’ll be turning

An equatorial mount has two adjustments for pointing its axis: the altitude bolts (which raise or lower the axis, to match your latitude) and the azimuth ones (which swing it left and right). During the alignment you’ll only touch those two, never the mount’s own axes.

celestial pole Azimuth left and right Altitude up and down
During the alignment you only touch these bolts, never the mount’s own axes.

Getting set up

  1. Set the tripod with the leg marked “N” pointing north (with a compass or your phone). Mind the magnetic declination: across the contiguous United States it runs from about 15° west (Maine) to 15° east (Washington state), so look up the figure for your area instead of trusting the needle. In the UK it’s only a degree or so.
  2. Level the mount with the bubble level, lengthening or shortening the legs.
  3. Set the latitude scale to yours (about 34° in Los Angeles, 40° in Denver or New York, 48° in Seattle, 51° in London).
  4. Put the telescope in its home position: counterweights down and the tube pointing at the pole.

Heads-upDo the alignment with the whole setup mounted and balanced: if you add a camera or a guide scope afterward, the tripod can settle and you’ll have to do it again.