Cooling your telescope down · Practice
How long does yours take
Your telescope, the temperature jump and whether you have a fan: the minutes, the gap that stays, and when you can start.
In millimeters (1 in = 25.4 mm). This is what really rules. Leave it empty and we’ll assume a typical thickness for your aperture.
From the temperature where you store it to tonight’s. 10 °C is 18 °F; if yours is in °F, divide it by 1.8.
Worked out with the formula Alan Adler published and calibrated against his own measurements on a Newtonian (Sky & Telescope, January 2002). It’s an estimate, not a measurement of your tube: another published model gives times as little as half as long for the same thickness, which is why we give both. The mass of the cell, and any counterweights behind the mirror, can stretch it out a good deal.
Why we give a range and not a number
The two serious sources we found don’t agree: for a mirror 50 mm (2 in) thick starting 10 °C away, Adler’s measured formula gives almost six hours and the Cruxis model about three. The author of that model warns that without measuring the mirror’s actual temperature, his coefficients are probably impossible to pin down closer than 50%.
So take it as an order of magnitude. If you want your real number, measure it: Adler published how, with two temperature readings a while apart.
What waiting doesn’t fix
Look at the third figure, the gap that never goes. That’s the one that really matters, because it’s the difference you’ll be shooting with all night. Waiting longer doesn’t change it: the only things that do are moving air across the mirror or keeping the telescope somewhere cold.