Skip to content
ES App (ES) ↗

The gear

Autoguiding

In a sentence: A small camera watches one star and corrects the mount without a break, so the stars come out round in exposures of several minutes.

The essentials

No mount follows the sky perfectly. Guiding uses a small guide scope (or an off-axis guider on the telescope, an OAG) and corrects every few seconds. Its quality is measured in arcseconds (RMS): you want it below half your image scale. Without guiding you can still shoot, with short exposures, above all at short focal lengths.

How it works

A small camera takes photos of one star every second or every few seconds. If the star moves, the software (PHD2, the ASIAIR’s own…) sends small corrections to the mount. The result is measured as RMS error in arcseconds.

How good is good enough

As a rule of thumb, the RMS should be below half your image scale. At 1.29″/pixel, guiding at 0.6″ RMS is very good. With a 200 mm lens (3.88″/pixel) modest guiding is plenty, and on short exposures you can do without it.

Step by step, with diagrams and a simulator: connecting, calibrating and reading the graph.

Guiding with PHD2

Related concepts

← All the guides and concepts