Your first telescope · Step 7 of 7
Three example setups, with their budgets
In a sentence: One to start with the bare minimum, the balanced one that lasts years, and one for planetary. In practice, adjust it to your own case.
Three real examples
| Piece | To start | Balanced | Planetary |
|---|---|---|---|
| Mount | Star tracker with GoTo (Star Adventurer GTi) | HEQ5 Pro or AM3 | AZ-GTi in equatorial mode or a light EQ |
| Tube | 50–61 mm refractor | 72–80 mm ED refractor with a flattener | Maksutov 127/1500 |
| Camera | Your DSLR | Uncooled color, or a basic cooled one | Planetary with 2 µm pixels |
| Guiding | — | 30 mm guide scope and a guide camera | — |
| Control | Intervalometer | ASIAIR or a mini PC | Laptop with SharpCap |
| Extras | Battery and dew heaters | Battery, dew heaters and a filter | 2× Barlow and an ADC |
| Approximate total | $1,000–1,650 | $2,600–3,900 | $1,150–1,700 |
The totals add up the rows using the ranges from the earlier steps. Buy everything new and pick the priciest option in every range and the balanced setup goes past $4,500; these figures are what it costs in practice, because a first setup is normally a mix of new and used pieces. Mounts and tubes are what you save most on used, and what least goes wrong. Prices move: take them as an order of magnitude, not as a firm quote.
And after that, what?
The usual order of upgrades: guiding, a cooled camera, filters and, later on, a mono camera with a wheel. A good mount survives all of those changes; that’s why it’s worth not skimping on it at the start.