Skip to content
ES App (ES) ↗
Step 1 of 7: What guiding does

Guiding with PHD2 · Step 1 of 7

What guiding does, in one diagram

In a sentence: A small camera looks at a star every 2 seconds and corrects the mount before your frame is ruined.

Without guiding, the stars get away

The mount turns at the rate of the sky, but with small errors: the periodic error of the gears (a back-and-forth that repeats every few minutes), imperfect polar alignment (a slow drift in one direction) and the wind. Added up, they move the star a few arcseconds… and in your frame that’s several pixels.

No guiding: a streak With guiding: a dot
The same star on a 5-minute exposure through a 750 mm telescope.

The guiding loop

PHD2 repeats one very simple cycle, over and over, all night:

1 2 3 4 2 s exposure with the guide camera Measure 0.3 px to the right Correct: a 150 ms pulse Repeat all night
About 30 corrections a minute, so small you’d never see them by eye.
  1. Takes a short exposure with the guide camera (2 seconds).
  2. Measures how far the guide star moved, to tenths of a pixel.
  3. Sends a small pulse to the mount to put it back.
  4. And round it goes again.

What you get out of it

Exposures of 3, 5 or 10 minutes with round stars, at any focal length. Fewer subs for the same total time, less read noise and more signal on faint targets.

TipGuiding won’t fix a badly balanced mount or a very bad polar alignment: it papers over them. The better the foundation, the less work PHD2 has to do and the rounder your stars come out.