Collimating your telescope · Step 5 of 7
Collimation step 2: the primary
In a sentence: Turn the screws at the back of the tube until the primary’s center spot sits right on the Cheshire’s crosshair.
The spot, on the bullseye
With the secondary set, look through the Cheshire again. In the center you’ll see the primary’s center spot (a light-colored ring) and the Cheshire’s dot or crosshair. You have to bring them together: the Cheshire’s dot, inside the ring of the spot.
How to adjust it
- Loosen the primary’s three locking screws (the small ones) a little.
- Turn one adjustment screw a quarter turn and watch which way the spot moves. That’s how you learn what each one does.
- Two of them will walk the spot onto the bullseye; the third one you’ll hardly need.
- Tighten the locking screws gently and check that the spot hasn’t moved.
TipWith a laser it’s even easier: the red dot has to come back to the center of the laser’s own target. You can do it on your own from the back of the tube, without walking around to the focuser.